CP CPL40 Інструкція з використання та обслуговування - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з використання та обслуговування для Міксер CP CPL40. CP CPL40 19 сторінок. Planetary mixer mechanical speed variation
Друкувати сторінкуINSTALLATION
The mixer must stand in a vertical position, on a smooth surface sufficiently sturdy for the load (floor
with resistance over 20 km/cm2). If in danger of tipping over, anchor the mixer to the floor using 4
plugs or bolts with a traction resistance over kg 300 (M8).
Connection to electrical mains
The electrical connection must be carried out by a specialized electrician, according to the modalities
and standards in force in the country where it is installed. Make sure that the voltage and frequency
of the system are the same as those on the mixer identification plate. Incorrect connection makes
the warranty void.
PRESERVATION OF THE MACHINE
Storage before a long period out of service
Clean the mixer thoroughly.
Disconnect it from the electrical mains.
If possible, put it back into its original packing.
WARRANTY TERMS
Validity: The warranty starts from the delivery date and lasts 12 months, if:
§
The mixer was not damaged during transportation, and it was installed, commissioned, used and
serviced as prescribed in this manual.
§
It was not tampered with, modified and no unintended tools were installed on it.
§
It did not undergo modifications or repairs carried out by the customer or third parties in an
incompliant fashion or without the prior consent of the supplier.
The following conditions constitute improper use of the mixer:
•
Loading more than what is allowed or use of unsuitable ingredients.
•
Cleaning with unsuitable tools or instruments that can scratch the bowl or damage the mixer or paint.
•
Use of the mixer in unsuitable places.
Modality for granting the warranty
If the customer finds defects in the mixer, he must immediately inform the supplier, who will carry out a quick
analysis of the lack of compliance and will establish the intervention mode with the customer.
After agreement with the supplier, the customer must provide him with the needed time and opportunity to
carry out modifications, improvements, repairs or the supply of spare parts which the supplier deems
reasonably necessary. If this does not occur, the supplier will not be held liable.
Parts subject to wear
Some components are scaled for a life duration far longer than that of normal mixer use during the time of its
warranty. Breakage or malfunctioning of these pieces depends on their use. They are therefore considered
parts subject to wear and are not included in the warranty, unless they manifest evident defects in the parts
or machinery.
The parts subject to wear are: transmission belts, motors, bearings and bowl.
Instruction manual CPL-40
12 of 19