Avonic CM-CON100 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Avonic CM-CON100. Avonic CM-CON100 10 сторінок. Ptz camera controller
Також для Avonic CM-CON100: Посібник користувача (12 сторінок), Посібник користувача (13 сторінок), Посібник користувача (11 сторінок), Посібник користувача (16 сторінок)

Introduction

Thank you for purchasing the Avonic CM-CON100 Keyboard Controller. Before beginning to operate

this device, please read the manual in order to make sure the best performance is obtained. Save this

manual for future reference.

•

Installation and servicing should only be done by Qualified Service Personnel and conform to

all local codes.

•

This unit is designed for indoor use only and it must not be installed where exposed to water

or other liquids and moisture.

•

Before powering on the device, check the input power voltage carefully.

•

Avoid shock and vibration when transporting and installing the device.

•

Use wall mount brackets or ceiling mount brackets available at Avonic for safe installation.

•

Electronic devices produce heat. Do not block the ventilation slots of the device and make

sure the installation environment is well ventilated to avoid overheating.

•

Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device, do not

use strong or abrasive detergent to clean that will damage the device.

•

If you wish to dispose this product, please contact Avonic to obtain info about the take-back

procedure.

•

FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions: 1. This device may not cause harmful interference, and 2. This device must

accept any interference received, including interference that may cause undesired operation.

•

CE: Certification