Billi B-4000 XL Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Сантехнічний виріб Billi B-4000 XL. Billi B-4000 XL 16 сторінок.
Також для Billi B-4000 XL: Посібник з монтажу (8 сторінок)
Друкувати сторінку
User guide
Billi B-4000 – XT, XR.
Options & Operation
To operate, simple press the red (left) button to
dispense boiling water, and blue (right) button
ring to dispense ambient filtered water .
When the red or blue buttons are double
tapped, the water will dispense continually
until interrupted by another light press
of either button .
Operating modes can be selected by the user
by entering option mode . Within the options
mode, you can set the safety switch thorough
the hot red button (left) and power save mode
through the blue button (right) .
—To enter the options mode:
1 . Turn on the unit and wait for normal
operation (red and blue buttons are both
illuminated constantly) .
2 . Press both the red and blue buttons & then
while pressing the two buttons, touch the
red lock icon located in the middle and
towards the end of the lens . Press and hold
both buttons and safety switch for three
seconds .
3 . Icons will flash yellow .
4 . Release the safety switch and red
and blue buttons .
5 . Unit is now in options mode .
6 . If you wish to change or activate the power
saving mode, follow the power save mode
settings procedure below .
—Safety Switch settings
The
Red
padlock indicates the different safety
settings enabled . To change or activate a
setting once in options mode as above, press
and release the red (left) button to scroll
through the following options;
– Red Icon Off: indicates the hot tap is
disabled .
– Padlock icon on, Red icon on: indicates hot
tap safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled .
6
To save new setting and exit Options Mode,
touch the safety switch and release . Wait 10
seconds for unit to return to normal operation
with the desired settings .
To dispense boiling water once the safety
switch is activated simply touch the red lock
icon on top of the touch lens you will be able
to dispense boiling water for 8 seconds . After
8 seconds the safety switch will automatically
reactivate, and the red padlock icon will
appear again .
— Power save mode settings
(EcoIntelligence, standby or on 24/7)
Green
The
icons on the tap indicates the
power save level that is selected . To change
or activate a setting once in options mode,
press and release the blue (right) button to
scroll through the following options;
– Green leaf icon on: indicates Eco
Intelligence™ self learning timer is enabled .
– Moon & star icon on: indicates Standby
Mode is enabled .
– Blue Icon On, no green icons: indicates
system is in 24 hour continuous mode .
To save new setting and exit Options Mode,
press the safety switch and release . Wait 10
seconds for unit to return to normal operation
with the desired settings .
—Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing .