Avonic AV-MT250 Series Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для Стелажі та підставки Avonic AV-MT250 Series. Avonic AV-MT250 Series 19 сторінок. Ceiling mount
Також для Avonic AV-MT250 Series: Посібник користувача (11 сторінок)

Друкувати сторінку

Mounting and Installation

This chapter describes the steps you have to perform to mount and install the Product in a correct and safe

manner.

These steps are subdivided into the following groups, each of which is described in a separate section:

1. Mounting on a ceiling or mounting pole

Take the following precautions to prevent the Product and camera from falling down which may cause

injuries:

• Set up this Product on a hard, stable surface, or mount it to a wall or (computer) screen.

• ONLY use an Avonic mount for mounting to a wall or ceiling.

• Ensure the mounting construction is capable of supporting four times the weight of the Product. (See

'General Specifications > Weight product' in the Product Datasheet for the exact weight.)

• Use a safety loop or drop protection that prevents the Product from falling if the mounting construction

fails.

• During mounting and installation, NEVER install a Product above a person.

• Check the installation at least once a year. An improper mounting could cause the unit to fall off,

resulting in personal injury.

Mounting on a ceiling or mounting pole

1. Baseplate

To place the mount, follow these instructions:

The first step in mounting the MT250 ceiling bracket is to fasten the baseplate to the ceiling (Figure 6.).

If you choose to mount the camera onto a standard VESA polemount, the baseplate has two VESA75

mounting possibilities (Figure 5.), making it easy to find the best position for the bracket.

For safety reasons, follow exactly the warning under

mounting construction is capable of supporting four times the weight of the Product.

Figure 3: Baseplate

AV-MT250

| www.avonic.com

Mounting and

Installation, and make sure that the