CP Electronics ELTD1 Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Перемикач CP Electronics ELTD1. CP Electronics ELTD1 2 сторінки. Emergency lighting test switch
Друкувати сторінку
Specification
LOAD
3 Amp incandescent lighting
3 Amp fluorescent lighting
3 Amp compact fluorescent lighting
3 Amp low energy lighting
3 Amp low voltage lighting (switch primary of transformer)
Fluorescent lighting (max 3 fittings recommended)
For fluorescent lighting total power factor correction capacitance must not exceed 15μF
SUPPLY VOLTAGE
220-240 Volts AC 50 Hz
TIMING PERIOD
10 minutes, 1 hour, 3 hours
FIXING METHOD
DIN rail
TERMINAL CAPACITY 2.5mm
MATERIAL
Noryl, self extinguishing
TYPE
Class 2
TEMPERATURE
-10°C to 35°C
CONFORMITY
EMC-2014/30/EU
LVD-2014/35/EU
For further compliance information visit
www.cpelectronics.co.uk/compliance
IMPORTANT NOTICE!
This device should be installed by a
qualified electrician in accordance with
the latest edition of the IEE wiring
regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
2
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
Ref: #WD078 Issue 6