Billi Quadra Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Сантехнічний виріб Billi Quadra. Billi Quadra 13 сторінок. Xl, xt, xr tap options
Також для Billi Quadra: Посібник з монтажу (8 сторінок), Посібник користувача (12 сторінок), Посібник з монтажу (7 сторінок)

Друкувати сторінку

User guide

Billi Quadra & Quadra Sparkling Plus – XL.

Options and Operation

To operate, simply press the left lever to

dispense boiling water and the right lever

to dispense chilled . Pressing both levers will

dispense sparkling water . When lifted the

levers will latch for continual delivery, until

released with a light press .

Operating modes can be selected by the user

by entering Options Mode .

Within the options mode, you can set the safety

switch through the hot water lever and power

save mode through the cold water lever .

To enter the options mode:

1 . If the following sequence malfunctions,

remove the sparkling unit control box

and try again .

2 . Turn on the unit and wait for normal

operation (red & blue icons are both

illuminated constantly) .

3 . Touch the safety switch indent at the back

of the black panel and push both the hot

and cold levers down . Hold both levers

and safety switch for 3 seconds .

4 . Icons will flash yellow .

5 . Release both the levers & safety switch .

6 . Unit is now in options mode .

7 . If you wish to change or set the safety

switch mode, follow the safety switch

settings procedure below . If you wish

to change or activate the power saving

mode follow the power save mode

settings procedure below .

Safety Switch settings

The

Red

padlock indicates the different

safety settings enabled . To change or activate

a setting once in options mode as above, press

and release the hot (left) lever to scroll through

the following options;

– Red Icon Off: indicates the hot tap

is disabled .

– Padlock icon on, Red icon on: indicates

safety switch is enabled

– Red Icon On: indicates normal operation

with safety switch not enabled .

To save new setting and exit Options Mode,

touch the safety switch and release . Wait 10

seconds for unit to return to normal operation,

with the desired settings .

To dispense boiling water once the safety

switch is activated simply touch the indent

on the black panel, at the back of the tap .

You will be able to dispense boiling water for

8 seconds . After 8 seconds the safety switch

will automatically reactivate, and the red

padlock icon will appear again .

Power save mode settings

(EcoIntelligence, standby or on 24/7)

The

Green

icons on the tap indicate the

power save level that is selected . To change

or activate a setting once in options mode

press and release the cold(right) lever to

scroll through the following options;

– Green Leaf icon: indicates Eco Intelligence™

self learning timer is enabled .

– Moon & Star Icon on: indicates Standby

Mode is enabled .

– Blue Icon On, no green icons: indicates

system is in 24 hour continuous mode

To save new setting and exit Options Mode,

press the safety switch and release . Wait 10

seconds for unit to return to normal operation,

with the desired settings .

Holiday mode

To set press the pressure relief valve located

under the unit cover beside the filter housing .