Avonic CD500 Короткий посібник - Сторінка 2
Переглянути онлайн або завантажити pdf Короткий посібник для Комп'ютерне обладнання Avonic CD500. Avonic CD500 2 сторінки.
Також для Avonic CD500: Посібник користувача (20 сторінок), Короткий посібник (2 сторінок), Посібник користувача (19 сторінок)
Друкувати сторінку
QUICK GUIDE
1. Unbox
Unbox the CD500. Contact Avonic if the box is
damaged. Be gentle with the CD500.
2. Installation of the CD500
Install the cameras to the MT220 mount using the
supplied screws. Download the MT220 manual at
the
accessories page
on the Avonic website.
3. Connect the CD500
•
Connect the two cameras using CAT6a cables to
the camera ports on the CD500. For video
output you need to connect a HDMI cable.
•
Connect your computer to the CD500, configure
your ethernet adapter to network segment
192.168.5.xxx
4. Configure cameras
•
Turn on the first camera and configure its
network settings according to your local
network. Do the same for the other camera.
•
Set both camera's exposure and white balance
to match the circumstances in the room.
•
Take note of the two IP addresses of the
cameras, you will need them during the
installation of the CD500 and Teacher Tracker.
5. Configure CD500
•
Open a browser and navigate to the
CamDirector's default IP address: 192.168.5.50
•
Login using the following credentials:
Username: admin Password: admin
•
Navigate to System > Settings and setup the
network settings to your preferences. Add the
IP addresses of both cameras. Check if your
license has been activated (Settings > Status).
•
Save the changes and reboot the CD500. This
will take a couple of minutes. Upon reboot the
CD500 will display its IP address on the HDMI
output for one minute.
6. Configure software (calibration)
Calibration is needed for the CamDirector
software to track a
®
person in front of the camera. Follow instructions below:
1. Navigate to the Teacher Tracker > Calibration. You can do
the calibration by yourself, but it is recommend to do it with
two persons, one behind the computer and one person on
stage.
2. Click Start Configuration. Follow on screen instructions. The
calibration is done when the tally lights on the fronts of
both cameras are solid green.
3. Navigate to Teacher tracker > Info. Enable the teacher
tracker toggle button to enable/ disable the teacher Tracker.
4. Navigate to Teacher Tracker > Audience and follow the on-
screen instructions to set the Audience Exclusion zone.
5. The initial set up is done, you can close the WebInterface.
The CamDirector
®
is operational.
7. Complete Manual
Download the manual from www.avonic.com.
8. Support Website
We've created a knowledge base in which you can find
frequently asked questions and interesting articles for you to
read. This page also contains a quick way for you to submit a
support ticket or give support a call. Add
support.avonic.com
your favorites and you're ready for every challenge that comes
your way.
9. Contact
You can reach us by telephone +31(0)15 711 2712, WhatsApp
for business +31(0)6 1600 9300 or via email
Let's create a story!
to