Billi B-5000-XL Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Сантехніка для кухні та ванної кімнати Billi B-5000-XL. Billi B-5000-XL 17 сторінок.
Також для Billi B-5000-XL: Посібник користувача (16 сторінок)
Друкувати сторінку
User guide
Billi B-5000 – XL.
Options and Operation
To operate, simply press the left lever to
dispense boiling water and the right lever to
dispense chilled . When lifted the levers will
latch for continual delivery, until released with
a light press .
Operating modes can be selected by the user
by entering Options Mode .
Within the options mode, you can set the safety
switch through the hot water lever and power
save mode through the cold water lever .
To enter the options mode:
1 . Turn on the unit and wait for normal
operation (red & blue icons are both
illuminated constantly) .
2 . Push both the hot and cold levers down
& then while holding the two levers down
touch the safety switch indent at the back
of the black panel . Hold both levers and
safety switch for 3 seconds .
3 . Icons will flash yellow .
4 . Release both the levers & safety switch .
5 . Unit is now in options mode .
6 . If you wish to change or set the safety
switch mode, follow the safety switch
settings procedure below . If you wish
to change or activate the power saving
mode follow the power save mode
settings procedure below .
Safety Switch settings
The
Red
padlock indicates the different
safety settings enabled . To change or activate
a setting once in options mode as above, press
and release the hot (left) lever to scroll through
the following options;
– Red Icon Off: indicates the hot tap
is disabled .
– Padlock icon on, Red icon on: indicates
safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled .
To save new setting and exit Options Mode,
touch the safety switch and release . Wait 10
seconds for unit to return to normal operation,
with the desired settings .
To dispense boiling water once the safety
switch is activated simply touch the indent
on the black panel, at the back of the tap .
You will be able to dispense boiling water for
8 seconds . After 8 seconds the safety switch
will automatically reactivate, and the red
padlock icon will appear again .
Power save mode settings
(EcoIntelligence, standby or on 24/7)
Green
The
icons on the tap indicate the
power save level that is selected . To change
or activate a setting once in options mode
press and release the cold(right) lever to
scroll through the following options;
– Green Leaf icon: indicates Eco Intelligence
self learning timer is enabled .
– Moon & Star Icon on: indicates Standby
Mode is enabled .
– Blue Icon On, no green icons: indicates
system is in 24 hour continuous mode
To save new setting and exit Options Mode,
press the safety switch and release . Wait 10
seconds for unit to return to normal operation,
with the desired settings .
Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing .
5