AVPro Edge AC-EX70-UHD-KIT Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач AVPro Edge AC-EX70-UHD-KIT. AVPro Edge AC-EX70-UHD-KIT 19 сторінок. Ultra slim 4k hdmi via hdbaset 70 meter extender
Також для AVPro Edge AC-EX70-UHD-KIT: Посібник із швидкого старту (4 сторінок)
Друкувати сторінку
Transmitter Overview
IR IN
IR OUT
I-PASS
Indicator Troubleshooting Lights - Transmitter
POWER - On the back by power HDBaseT RJ45 port:
that the power is connected. There are only two states for light:
· Light Is On = Power supply is connected and functioning.
· Light Is Off = Power supply is not connected or there is no power present. In order to have
power, check the power supply, USP, Outlet, etc.
STATUS - On front by HDMI Port: (Blue) This indicator shows that the HDMI
source is connected. The states are:
· Light Is On (Solid) = Sync w/ HDMI source is correct and solid.
· Light Is Flashing = The light flashes during the sync process. If it is flashing continuously, a
picture may not be present.
EDID DIP
Switches
see page 12
HDMI Input
48V Power
HDMI Signal
Indicator LED
HDBaseT
RS-232
Power LED
(Red)
This is an indicator
RS-232 Operation
Mode Switch
5