AVPro Edge AC-DA14-AU Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач AVPro Edge AC-DA14-AU. AVPro Edge AC-DA14-AU 15 сторінок. A full 4k60 4:4:4 (up to 18gbps) distribution amplifier with advanced edid management
Друкувати сторінкуAC-DA14-AUHD
When Changing EDIDs, please follow the steps below
1.
Start with power off
2.
Set DIP to '00000' (all up).
3.
Power on the unit
4.
Power on the source device and connect the HDMI input port.
Note1: EDID Copy mode: EDID will be copied from sink on OUTPUT 1. The
AC-DA14-AUHD is set this way by default for maximum "Plug & Play" Compatibility. If you
change sink (Display) plugged into OUTPUT 1, please follow the steps below if you wish to use
the new sink's EDID.
1.
Start with power off
2.
Set DIP to '00000' (all up).
3.
Power on the unit
4.
Power on the source device and connect the HDMI input port.
Page 10