DFI BT9A3 Series Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Комп'ютерне обладнання DFI BT9A3 Series. DFI BT9A3 Series 19 сторінок. Com express mini
Друкувати сторінку
Connectors
CPU Fan Connector
1
Sense
+12V
Ground
3
Connect the CPU fan's cable connector to the CPU fan connector on the board. The cooling fan
will provide adequate airflow throughout the chassis to prevent overheating the CPU and board
components.
BIOS Setting
"Module Board H/W Monitor" submenu in the Advanced menu of the BIOS will display the cur-
rent speed of the cooling fan. Refer to chapter 3 of the manual for more information
Chapter 3 Hardware Installation
Chapter 3
COM Express Connector
The COM Express connector is used to interface the BT9A3 Series COM Express board to a
carrier board. Connect the COM Express connector (lcoated on the solder side of the board) to
the COM Express connector on the carrier board.
.
Refer to the following pages for the pin functions of the connector.
12
COM Express Connector
www.dfi .com