Aqua Pulse Spas Lorne Luxury Посібник користувача - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник користувача для Гідромасажна ванна Aqua Pulse Spas Lorne Luxury. Aqua Pulse Spas Lorne Luxury 17 сторінок.
Друкувати сторінку
Symptoms
No Power
No Circulation
RCD Repeatedly Tripping
Jet Surge
No Heat
Noisy Motor
Display Panel Not Working
Pump doesn't turn on
Thermometer button
flashes when the Heat
Button is
pressed
UNLESS YOU HAVE THE APPROPRIATE ELECTRICAL LICENCE DO NOT OPEN THE SPAS
COMPUTER BOX, PLEASE CONTACT THE STORE OF PURCHASE FOR DETAILS OF A
LICENCED CONTRACTOR.
If you have any issue with your spa and the troubleshooting does not resolve your issue, please
contact the store of purchase before engaging a technician or electrician for help.
Possible Cause(s)
MCB Switch off
Inadequate wiring of power to spa
Fuse blown in control box
RCD Tripped
RCD Connected Improperly
Impeller clogged
Water level too low
Power Supply
Short in Grounding
Water level too low
Pump suctions are blocked
Heater is not switched on
Water level is too low Heating
element is damaged
Damaged or worn bearings
Low voltage
Low water level
Frozen pump
Poor connection
No power to the pump
Low water level
Air Lock
Not enough pressure to the
circulation pump
Possible Resolutions
Check MCB
Consult electrician
Replace fuse
Reset
Consult electrician
Access and clean
Top up water
Check power supply is adequate
Consult your electrician.
Top up water Clear
the suctions
Turn on heating (See Manual)
Top up the water
Contact seller
Contact seller
Check electrical supply
Top up the water
Thaw out
Unplug and reconnect the cable
See "No Power" above
Top up the water
See "Air Lock" in user's manual
Operate the circulation pump for a
few minutes before turning on the
heater.
17