Allied Telesis AT-9800 Series Посібник зі швидкого встановлення - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Перемикач Allied Telesis AT-9800 Series. Allied Telesis AT-9800 Series 12 сторінок. How to set up pppoe between a linux client and access concentrator
Також для Allied Telesis AT-9800 Series: Примітка до випуску (5 сторінок), Як налаштувати (9 сторінок), Як це зробити (8 сторінок)
Друкувати сторінку
10
9.
At the login prompt, enter the user name and password
The default username is manager:
User Name: manager
Password: friend
The System Status page is displayed. Select options from the sidebar menu
to configure and manage the switch.
For context-sensitive online help, click on the Help button at the top of the
sidebar menu or on any pop-up page.
System LEDs
Table 2: System LEDs for AT-9800 Series switches.
LED
State
PWR
Green
(Power)
Fault
Red
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
6 Flashes
RPS (Redundant
Green
Power Supply)
CompactFlash
Green
Activity
(Rear panel)
The AT-9800 Series Hardware Reference has further troubleshooting information,
including information on Switch Port LEDs.
Function
The switch is receiving power
The switch or management software is malfunctioning
A switch fan has failed or is operating below the
recommended speed
If RPS monitoring is enabled, an RPS fan has failed or is
operating below the recommended speed
If an RPS is connected, the switch's PSU (Power Supply
Unit) has failed
If RPS monitoring is enabled, the RPS PSU has failed
If RPS monitoring is enabled, an RPS is not connected or
is not operational
The switch's temperature has exceeded the
recommended threshold
An RPS is connected to the switch and is receiving
power
The compact flash memory is active. Do not eject the
flash memory module
AT-9800 Series
C613-04038-01 REV F