AVR AT90USB162 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Блок управління AVR AT90USB162. AVR AT90USB162 3 сторінки. Dt-avr at90usb162 cpu module

DT-COMBO BASIC BASE BOARD will light up. If one

or both LEDs do not light up recheck the connections

between the modules and the power supply.

6. Program the AT90USB162 TEST FILE.HEX using

bootloader mode and FLIP.

7. If the download process succeeded, the LEDs

connected to Port B, Port C,and Port D will light up

alternately representing the binary numbers of 0-

255. The LEDs at Port D bit 2 and 3 will not light up

because they are used as UART serial communication

lines. While the LEDs on Port C bit 0,1, and 3 will not

light up.

8. Run the terminal program on the computer to see the

serial data sent by the module to the computer. This

serial communication uses the following configuration:

Baud rate

•

Data bit

•

Parity

•

Stop bit

•

Flow control

•

9. When using a HEX view (not ASCII), monitor screen

will show hex numbers from 00H up to FFH sent

repeatedly.

Trademark & Copyright

AVR is registered trademark of Atmel Corporation.

CodeVisionAVR is copyright by Pavel Haiduc, HP InfoTech s.r.l.

FLexible In-system Programmer is copyright by Atmel

Corporation.

♦ Thank you for your confidence in using our products. If there

are difficulties, questions, or suggestions regarding this

product, please contact our technical support:

: 9600 bps

: 8

: none

: 1

: none