CPcam IR-CAM-C Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для IP-камера CPcam IR-CAM-C. CPcam IR-CAM-C 16 сторінок.
Друкувати сторінкуJUMPER CONFIGURATION
JUMPER CONFIGURATION
A. To select the active time of the PIR camera, please install a jumper at the proper position.
(Default is 10 seconds.) The video of the camera and the alarm control time will be
activated for 10 seconds.
Please see the following configuration:
Always On
Input the power and warm up for 30 seconds, then the PIR camera will function normally.
When the object comes into the detective range, the PIR Camera will triggered and run
for 10 seconds. If the object is still moving within the detective range after 10 seconds,
the PIR camera will continue being activated until the object is not in the detective range.
JUMPER CONFIGURATION
JUMPER CONFIGURATION
A. To select the active time of the PIR camera, please install a jumper at the proper position.
(Default is 10 seconds.) The video of the camera and the alarm control time will be
activated for 10 seconds.
Please see the following configuration:
Always On
Input the power and warm up for 30 seconds, then the PIR camera will function normally.
When the object comes into the detective range, the PIR Camera will triggered and run
for 10 seconds. If the object is still moving within the detective range after 10 seconds,
the PIR camera will continue being activated until the object is not in the detective range.
120 sec
30
sec
10
sec
120 sec
30
sec
10
sec
10
10