AVS Ventvisor Інструкція з монтажу Посібник з монтажу

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Service at 800-241-7219

Important Safety Information

• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with

material, flush area with large amounts of water. If irritation persists, get immediate medical

attention. USE PREP ON RUBBER ONLY

Contents

NOTE: Actual product may vary from illustration.

Front Driver

Visor

Tools Required

Preparation Before Painting / Installation

• Please review your warranty card BEFORE installation of this product.

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

Buff the outside rubber window channels where the visor will mount with a scotch brite pad, then clean

Be sure to prep all windows before installing the first visor to prevent surface prep pad from drying out.

mirror cap

Installation Instructions

Ventvisor

Front Passenger

Visor

Car Wash Supplies

NOTE: Actual application may vary slightly from illustrations.

prep rubber channel

NOTE: See surface prep warning on page 1

Deflector

Alcohol Pad x2

Clean Towel

with an alcohol pad.

Page 1 of 2

I - Sheet Number VV23 Rev.A

Surface Prep

Scotch Brite pad

Pad