AVS 6000 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Автосигналізація AVS 6000. AVS 6000 7 сторінок. Alarm system
Друкувати сторінкуHOW TO CHANGE PROGRAMMING REGISTER 1
Vehicle setup:
Programmable
feature
Arming beep
Disarming beep
Auxiliary detection
Shock sensor
Passive arm
Auto re-arm
Lock pulse on alarm
trigger
Not used
S h o c k
s e n s o r
adjustment
5
All doors closed, bonnet closed, turn ignition on last
Number
Initial
of
factory
pushes
setting
1
ON
2
ON
3
ON
4
ON
5
OFF
6
OFF
7
OFF
8
OFF
9
6
SELECT
the level
required
Description
1 beep on arm
2 beeps on disarm
Activate ultrasonics, microwave if fitted
Activate 2 stage shock sensor
System arms automatically 60 seconds
after exit. Will not lock doors.
If the system is disarmed and a door is not
opened within 60 seconds the system will
re-arm and re-lock.
When the alarm is triggered, the doors will
be sent a lock pulse. i.e. the would be thief
picks the door lock, the alarm triggers on
voltage drop due to the central locking
operating, then the doors immediately re-
lock to foil the thief.
After pressing the remote 9 times to enter
this mode, turn the ignition off. There are 8
levels of adjustment. The factory default
level is 6. Pressing the remote once will
increase the sensitivity by one level i.e. to
level 7. The LED will then flash 7 times to
indicate the new level. Pressing the remote
again will increase the level to 8 (max).
Pressing the remote again will return the
adjustment to level 1 (least sensitive).
Once you have the desired level turn the
ignition ON to exit this mode.