AVS AHDEXD30 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач AVS AHDEXD30. AVS AHDEXD30 2 сторінки. Hdmi extender over 2 x cat5e/6/7 full 3d pass-through support ir control 30m solution

Друкувати сторінку

INTRODUCTION

If you are looking for a way to extend an HDMI signal, then this HDMI

Transmitter and Receiver is what you have been searching for. This HDMI

extender allows you to use two Cat.5e/6/7 cables to extend the HDTV display

up to 30M for 1080P without any signal loss. It is equipped with HDMI connector

and is capable of supporting DVI equipment when used with an HDMI to DVI

adaptor. And if that weren't enough, you can use a remote to control your

device from over 30m away through an IR blaster and receiver pigtail.

It follows the standard of IEEE-568b, Cat.5e/6/7 cable can substitute HDMI

cable to achieve long distance transmission. It is designed for use in home

theater, professional A/V and personal computer switching applications.

PACKAGE CONTENTS

•1 x HDMI Transmitter unit, 1x HDMI Receiver unit

•1 x 5V DC power supply

•1 x User Manual

FEATURES

•HDMI, HDCP 1.2 and DVI compliant

•Support full 3D pass-through

•Support high resolution up to 1080P

•Super IR control system, IR transport channel can be forward or backward

per your installation

•Extend to 30M over 2 x Cat5e/6/7

•Support CEC bypass

•External and internal EDID settings

PANEL DESCRIPTION

Transmitter Unit

HDMI Extender

HDMI Extension over Cat5e/6

1 HDMI INPUT

2 IR OUTPUT

3 CAT5E/6/7 OUTPUT

Receiver Unit

HDMI Extender

HDMI Extension over Cat5e/6

DC 5V

1 CAT5E/6/7 INPUT

2 IR INPUT

3 HDMI OUTPUT

4 POWER SUPPLY INPUT

INSTALLATION

•Connect HDMI input port on transmitter to the signal source equipment

such as DVD player.

•Connect the 2x CAT5e/6/7 output on the transmitter with 2 CAT5e/6/7

cables to the CAT5e/6/7 inputs on the receiver.

•Connect to the IR blaster cable (not included in the package) for IR signal

transmission. Place the IR blaster in direct line-of-sight of the equipment to

be controlled.

•Connect HDMI output port on receiver to HDMI displays.

•Connect to the IR receiver cable (not included in the package) for IR

signal reception. Make sure that the remote being used is in direct

line-of-sight of the IR receiver.

•Plug the 5VDC power supply into the receiver and connect the adaptor to

AC outlet.

CONNECTION DIAGRAM

30 M Extension Over 2 x CAT5e/6/7

08：08

PLAY

HDMI Source

IR Channel

DC 5V

Cat5e/6/7-1

Cat5e/6/7-2