AVS RM70CQUAD Посібник з інсталяції

Переглянути онлайн або завантажити pdf Посібник з інсталяції для Монітор AVS RM70CQUAD. AVS RM70CQUAD 4 сторінки.

Thank you for choosing the AVS range of LCD monitors. Please ensure installation is carried out by a qualified technician.

IMPORTANT: Where wiring diagram shows an ACC connection the wire MUST be connected to ACC do not connect to ignition or constant

12v.

AVS RM43

WIRE COLOUR

FUNCTION

RED (ACC)

+12v ACC supply

BLACK

Earth

YELLOW RCA

AV2 camera input

WHITE RCA

AV1 camera input

(RM43)

YELLOW RCA

AV1 camera input

(RM50SM)

REAR BUTTON

FUNCTION

TOP

Adjust display brightness/contrast up

MIDDLE

MENU – push to enter menu and scroll through functions –

BOTTOM

Adjust display brightness/contrast display down

AVS RM SERIES LCD MONITORS – INSTALL GUIDE

October 2019

All connections to 12/24v should be appropriately fused.

General wiring schematic

CONNECT TO

Appropriately fused +12v switched ACC supply

Good earth source e.g. vehicle body/chassis

Reverse camera output. Monitor will auto switch to display this input when a signal is

detected e.g. when the car goes into reverse and powers on the camera. The display will

switch back to AV1 or turn off if there is no signal on AV1.

Camera output. Monitor will display AV1 until a signal is detected on AV2.

AVS RM50SM

brightness – contrast – saturation – language – mode - reset