Billion BiPAC 5200 Посібник зі швидкого встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Мережеве обладнання Billion BiPAC 5200. Billion BiPAC 5200 7 сторінок. Bipac 5200 series adsl2/2+ modem/routers
Також для Billion BiPAC 5200: Посібник із швидкого старту (10 сторінок), Технічні характеристики (2 сторінок), Посібник із швидкого старту (15 сторінок), Посібник з експлуатації (20 сторінок)

Billion 5200G ADSL2/2+ Modem/Router Installation

1.1 Starting out:

Before you can establish an Internet connection through your Billion 5200G

ADSL2/2+ Modem/Router make sure you have the following:

A Computer or Notebook with an installed Network Adaptor (sometimes called

an Ethernet Adaptor, Network Card or NIC)

An ADSL or DSL service account and configuration information provided by

your Internet Service Provider (ISP). You should need only a User Name and

Password, but you can check with your ISP to see if you require any of the

other following configuration parameters to connect your Billion 5200G

ADSL2/2+ Modem/Router to the Internet :

a. ISP User Name and Password

b. VPI/VCI parameters

c. Multiplexing Method

d. Host and Domain Names

e. ISP Domain Name Server ( DNS ) Address

f. Fixed or Static IP Address.

1.2 Steps for Connection:

The following are the steps to properly connect your Billion 5200G ADSL2/2+

Modem/Router:

1. Turn off your computer.

2. If you do not have an ADSL faceplate installed by your service provider, you

must ensure ADSL splitters (also called microfilters or filters) are fitted to all

telephone sockets in use.

3. Connect the supplied ADSL RJ-11 cable from the splitter/filter of your chosen

telephone socket (or ADSL faceplate if you have one) to the ADSL Port of your

Billion 5200G ADSL2/2+ Modem/Router (or LINE Port if you have no ADSL

Port)

4. Connect the Ethernet cable (RJ-45) from one of the Ethernet ports of your Billion

5200G ADSL2/2+ Modem/Router to the Network Adaptor in your computer.

5. Connect the Power adaptor to the Billion 5200G ADSL2/2+ Modem/Router and

plug the other end into a Power outlet. Power up the unit.

6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor

to locate the Router. Please wait for the ADSL light on the front of the router to

turn from slow flashing to rapid flashing or solid – this may take up to 1 minute

(see 3.1 Troubleshooting the connection).

QUICK INSTALL GUIDE