Allied Telesis Rapier 16fi Посібник зі швидкого встановлення - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Перемикач Allied Telesis Rapier 16fi. Allied Telesis Rapier 16fi 12 сторінок. Rapier switch
Також для Allied Telesis Rapier 16fi: Технічний паспорт (6 сторінок), Технічний паспорт (3 сторінок), Технічний паспорт (2 сторінок), Брошура (8 сторінок), Посібник зі швидкого встановлення (13 сторінок)

Configuring the Switch

Some configuration is necessary if you wish to enable the switch's advanced

switching capabilities. The switch can be configured by using the Command

Line Interface (CLI) or Graphical User Interface (GUI).

Using the CLI to configure a switch

Connect a terminal or PC to the Terminal Port (ASYN0)

Using the supplied RS-232 DB9 straight-through cable, connect a VT100-

compatible terminal or the COM port of a PC running a terminal

emulation program such as Windows Terminal, to the RS-232 Terminal

Port on the switch's front panel.

Set the communication parameters

Set the communication parameters on your terminal or terminal emulation

program to:

•

Baud rate: 9600

•

Data bits: 8

•

Parity: None

•

Stop bits: 1

•

Flow control: Hardware

After the switch has booted, the log-in prompt appears. If the log-in

prompt doesn't appear, press [Enter] two or three times.

When the switch boots for the first time it automatically creates an account

with manager privileges. The account has the log in name "manager" and

the password is "friend".

At the log in prompt, enter the log in name and password.

Password: friend

The switch's command prompt appears and you can now configure the

switch using the command line interface.

Change the password as soon as possible. Leaving the manager account with

the default password is a serious security risk. Make sure you remember the

new password as there is no way to retrieve it if it is lost.

Use the following command to change the account password:

set password

The Command Help lists available commands for each protocol, and their

syntax. To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help topic

Alternatively, type a question mark (?) at the end of a partially completed

command to see a list of valid options.

Rapier Series Switch

C613-04017-01 REV H