DG FPGA Налаштування - Сторінка 3

Переглянути онлайн або завантажити pdf Налаштування для Комп'ютерне обладнання DG FPGA. DG FPGA 20 сторінок.
Також для DG FPGA: Налаштування (5 сторінок), Налаштування (14 сторінок), Налаштування (8 сторінок), Налаштування (10 сторінок), Налаштування (18 сторінок)

dg_toeudp25gip_fpgasetup_xilinx.doc

2 Test environment setup when using FPGA and PC

To run the demo on FPGA development board, please prepare following environment.

• FPGA development boards:

a) TOE25G-IP: VCU118 and KCU116 board

b) UDP25G-IP: KCU116 board and FB2CGHH@KU15P card

• PC with 25 Gigabit Ethernet card

• 25Gb Ethernet cable:

a) VCU118 and FB2CGHH@KU15P card: SFP28 transceiver (25GBASE-SR), QSFP28

transceiver (100GBASE-SR), and MTP to 4xLC Fiber cable

b) KCU116: 25G SFP28 Active Optical Cable (AOC).

• USB cable for connecting between FPGA and PC

a) VCU118 and KCU116 board: 2 micro USB cables for programming FPGA and Serial

console

b) FB2CGHH@KU15P card: 1 mini USB cable for programming FPGA and JTAGAURT

• For FB2CGHH@KU15P card, use AB18-PCIeX16 board provided by Design Gateway

with ATX power supply to be power board for the card. More details of AB18 card are

displayed on following website.

https://dgway.com/ABseries_E.html

• Test application provided by Design Gateway for running on Test PC

a) TOE25G-IP: "tcpdatatest.exe" and "tcp_client_txrx_40G.exe"

b) UDP25G-IP: "udpdatatest.exe"

• VCU118 and KCU116 board: Serial console software such as TeraTerm installed on PC.

The setting on the console is Baudrate=115,200, Data=8-bit, Non-parity, and Stop=1.

Note: JTAG Terminal in applied instead of Serial console when using FB2CGHH@KU15P

card.

• Vivado tool for programming FPGA and JTAG Terminal (when using FB2CGHH@KU15P

card), installed on PC

Note: Example hardware for running the demo is listed as follows.

[1] 25G Network Adapter: Intel XXV710-DA2

https://ark.intel.com/content/www/us/en/ark/products/95260/intel-ethernet-network-adap

ter-xxv710-da2.html

[2] a) SFP28 to QSFP28 connection (VCU118 board and FB2CGHH@KU15P card)

SFP28 Transceiver: AZS85-S28-M1

https://www.sfpcables.com/25gb-s-sfp28-sr-transceiver-850nm-up-to-100m-2866

QSFP28 Transceiver: AMQ28-SR4-M1

https://www.sfpcables.com/100gb-s-qsfp28-sr4-optical-transceiver-module-1499

MTP to 4xLC Fiber cable: OM4-MTP-8LC-1M

https://www.fs.com/products/68047.html

b) 25G SFP28 Active Optical Cable: S28-AO01 (KCU116 board)

https://www.fs.com/sg/products/68335.html

[3] PC: Motherboard Gigabyte B460M AORUS PRO, 32 GB RAM, and 64-bit Windows10 OS

7-Jun-21

Page 3