Avsl Mercury AMPLUG02 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Avsl Mercury AMPLUG02. Avsl Mercury AMPLUG02 2 сторінки. Plug-in 2-way

PRODUCT FEATURES:

Easy to install, plug and play.

Built in low noise high gain amplifier to boost weak signals from aerial.

LED power indicator.

Built-in short circuit protection, and maximum output limiter prevents overload

Variable gain control allows fine adjustment of signal level.

INSTALLATION:

Before installing please ensure all devices to be connected to the amplifier are switched off and

disconnected from the mains. Please ensure there is sufficient ventilation available in order for the

unit to work properly, preferably a minimum clearance of 10cm from the sides and top.

Connect the aerial to the IN socket on the amplifier.

Connect TV sets to the OUT sockets on the amplifier.

Plug in the amplifier and TV to mains switch TV on.

Adjust amplifying gain by adjusting the rotary control, the correct level is when the best

picture and sound quality is achieved.

Please note:

This amplifier has no serviceable parts.

To clean the unit please remove it from the mains socket and wipe dust off with a dry cloth.

In case of a fault, please contact your dealer.

DO NOT attempt to open the case as it contains high voltages which could be lethal.

Keep unit away from moisture and heat sources.

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life. The goods must be disposed of

according to your local council guidelines.

Errors and omissions excepted.

130.036 UK User Manual