CPI Alio Vend Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Зчитувач карток CPI Alio Vend. CPI Alio Vend 18 сторінок.

Safety and Compliance

Before installing the Alio Vend card reader, please carefully read this technical guide, and in particular the safety instructions, at

least once. For safety purposes, take care to ensure that the contents of this installation guide have been understood and the

reader knows how to install, set up, and operate the card reader.

Intended use

The Alio Vend card reader is intended for use in vending machines. It is designed to combine remote audit, contactless, chip

and PIN, and touch screen technology into a single solution. With reduced hardware, the Alio Vend card reader delivers a PSD2

compliant, PCI certified solution that provides an enhanced installation experience, on screen diagnostics, improved consumer

user interface, and a measurable ROI with the combination of audit and cashless payment into a single device..

Use the card reader exclusively for this purpose. Under no circumstances can the manufacturer be held liable for any damage

or loss resulting from improper use of the equipment.

The Alio Vend card reader has been built in accordance with state-of-the-art standards and the recognized safety directives.

Please observe the safety instructions that follow.

Protecting persons and equipment

Technical specifications

Voltage Operating Range 9 V DC to 42 V DC

Full Load Amps (FLA)

Power Consumption

Temperature Ranges

Operating

Storage

Relative Humidity

High Voltage Inside.

Risk of Electric Shock.

Turn OFF power to the machine before installing or removing the Alio Vend card reader.

The installation work described in this guide may only be carried out by qualified technicians

or CPI trained and authorized personnel.

Risk of damage to the card reader.

The card reader control board is fitted with components that can be damaged by electrostatic

discharge. Please observe ESD precautions for components exposed to the risk of electrostatic

discharge. Installers should be properly grounded.

The card reader must not be operated in the presence of flammable gases, fumes, or water.

Keep water and other liquids away from the card reader. It is not suitable for use in areas

where there could be direct contact with water jets.

When transporting the device only use its original packaging. It is only in this way sufficiently

protected.

1.2 A Maximum

11 W

-20° C to +70° C

-30° C to +80° C

5% to 95% (Non-Condensing)

Published by CPI

Alio™ Vend Card Reader

01_CPI_Alio Vend Technician Guide_V1.0_EN