Avsl qtx ORB-400 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання Avsl qtx ORB-400. Avsl qtx ORB-400 6 сторінок. Bubble/haze machine
Друкувати сторінку
Remote timer control
When the machine is ready to operate, the ready light (5) on the remote timer control will illuminate.
You may now press the Manual (3) button for haze on demand – releasing button stops the haze effect
When the ready indicator is off, the ORB-400 needs time to re-heat and will not produce haze effect
For constant haze effect, use the latching Continuous (2) button and the Continuous LED (6) will light
The density of haze effect can be varied by adjusting the rotary Output control (7)
Pressing the Timer button (1) will activate the hands-free timer function and the timer LED (4) will light
The Interval control (8) adjusts the time between haze effect output in each timer cycle
The Duration control (9) adjusts the length of time that haze is produced in each timer cycle
Combined ORB effect
If the bubble wheel is switched on when haze is being produced, the haze passes through the bubble wands
to fill each bubble with fog. This gives a cloudy white appearance to the bubbles and produces a small "puff of
smoke" when each bubble pops.
Alongside the combined effect, the ORB-400 can perform separately as a fully functional haze or bubble
machine by simply switching off the function that is not required.
Specifications
Power supply
Bubble remote control frequency
Haze remote control functions
Haze fluid tank capacity
Heating element
Heat-up time
Dimensions
Weight
1.
Timer button (latching) - activates the timer control
2.
Continuous button (latching) – overrides timer control for constant haze
3 .
Manual button (non-latching) – overrides timer control for haze on demand
4.
Timer indicator – illuminated when timer function is active
5.
Ready indicator – illuminated when heated up ready to produce haze
6.
Continuous indicator – illuminated when continuous function is active
7.
Output control – adjusts the amount and density of haze effect
8.
Interval control – adjusts the interval between haze output on timer control
9.
Duration control – adjusts the time length of haze output on timer control
230Vac, 50Hz (IEC)
433MHz
Timer, Continuous, Manual, Interval, Output, Duration
2.3 litres
400W
4 – 5 minutes
300 x 260 x 645mm
10.15kg
160.462UK User Manual