DGL ROBO DANCE-R Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Іграшка DGL ROBO DANCE-R. DGL ROBO DANCE-R 9 сторінок.
Друкувати сторінку10. TROUBLESHOOTING
Problem
1. Power switch is not turned on.
2. There are no batteries installed or
Remote
batteries are improperly installed.
Won't Work
3. Batteries are dead.
Toy
1. Remote control is not turned on.
Won't Work
2. ROBO DANCE-R is not turned on.
1. Batteries are dead.
Toy
Suddenly Stops
2. Light interference.
11. BATTERY WARNING, CARE & MAINTENANCE
1. Do not mix alkaline, standard (carbon zinc), rechargeable (nickel hydride)
batteries.
2. Do not mix old and new batteries.
3. Non-rechargeable batteries should not be recharged.
4. Rechargeable batteries should be removed from the toy before being
charged.
5. Rechargeable batteries should be charged under adult supervision only.
6. Depleted batteries should be removed.
7. The supply terminals should not be short-circuited.
8. It is recommended to only use batteries of the same or equivalent type.
9. Batteries should be inserted with the correct polarity.
10. Please use the charger from original factory to ensure your safe usage.
11. Do not charge outworn batteries.
12. Do not over charge battery. Please unplug the charger once fully charged.
13. Do not charge the battery next to in ammables, such as carpet, timber oor or
wood furniture or on the surface of electro-conductive objects. Please always
keep an eye on the battery when charging.
14. Do not charge battery when it is not cooled down.
15. The charging temperature should be between 0º-40ºC.
16. See operating instructions of this battery or product.
17. Do not dispose of the battery as normal garbage. Please familiarize yourself
with the local garbage disposal methods for batteries and dispose of batteries
according to special requirements as required by state and local guidelines.
Cause
Solution
1. Switch power button to ON position.
2. Ensure batteries are installed in the
correct polarity position indicated.
3. Replace batteries.
1. Switch power button to ON position.
2. Switch power button to ON position.
1. Replace remote batteries.
2. Ride in a di erent environment to avoid
strong light.