Avtech AVC153 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Avtech AVC153. Avtech AVC153 2 сторінки. Ir dome camera (960h ultra resolution)
Друкувати сторінку
INSTALLATION
1.
Open the packet and select the location where you would like to install the dome camera. Take the mounting bracket
off the dome camera.
2.
Slightly drill the supplied three screws into the three round holes on the mounting bracket and rotate the bracket
clockwise until the screws are wedged into the narrower chase
secure the mounting bracket to the ceiling.
3.
Drill a hole in the middle circle and let the power and video line go through (as shown in Figure 2).
4.
Mount the dome body onto the mounting bracket and rotate it until it clicks to secure (as shown in Figure 3). Adjust
the camera to the correct position and test the dome camera to make sure it is working properly.
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this
unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75Ω coaxial cable.
C
A
U
T
I
O
N
:
C
A
U
T
I
O
N
:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been
advised of the possibility of such damages.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly "lead-free" and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this
symbol. Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to
revise or remove any content in this manual at any time.
Figure 1
C
A
C
A
R
I
S
K
O
F
E
L
R
I
S
K
O
F
E
L
(as shown in Figure 1)
Figure 2
U
T
I
O
N
U
T
I
O
N
E
C
T
R
I
C
S
H
O
C
K
E
C
T
R
I
C
S
H
O
C
K
. Tighten the fixing screws to
Figure 3