Avtech DG104A Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Avtech DG104A. Avtech DG104A 4 сторінки. Hd cctv total solution

INSTALLATION

Step1: Remove the camera base as shown in Figure 1, and disassemble the camera to four parts as shown in Figure 2.

Rotate anti-clockwise

Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing the

bracket and routing the cables (if necessary).

Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the bracket,

as shown in Figure 3.

Step4: Secure the bracket to the wall (or ceiling), as shown in Figure 4.

Where to look

Step5: Slightly adjust the camera lens to where it's supposed to face, and replace Part 1 and Part 2 back, as shown in

Figure 5 and Figure 6.

Step6: Hold the camera lens and Part 1, and rotate only Part 2 clockwise, as shown in Figure 6.

Part 1

Step7: Power on your camera, and check the viewing angle on the PC.

Step8: Adjust the position and the viewing angle of the camera, if necessary.

Remove

Figure 1

Cable routing

Figure 3

Figure 5

Camera lens

Base

Figure 2

Attach to wall (or ceiling)

Figure 4

Part 2

Hold camera & Part 1, and

rotate only Part 2 clockwise

Figure 6

Part 1

Part 2