Dell 5500 Series Посібник з налаштування та технічних характеристик - Сторінка 35
Переглянути онлайн або завантажити pdf Посібник з налаштування та технічних характеристик для Ноутбук Dell 5500 Series. Dell 5500 Series 40 сторінок. Dell networking 5500 gigabit ethernet switches
Також для Dell 5500 Series: Технічні характеристики (2 сторінок), Посібник із швидкого старту (18 сторінок)
Друкувати сторінку
POST behavior
Option
Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Numlock Enable
Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•
•
•
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extended BIOS
Allows you to create an extra preboot delay. The options are:
POST Time
•
•
•
Full Screen Log
•
Warnings and
•
errors
•
•
Manageability
Option
Description
Intel AMT
Allows you to provision AMT and MEBx Hotkey function is enabled, during the system boot.
Capability
•
•
•
MEBX Hotkey
When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
•
MEBX Hotkey
Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
•
Virtualization support
Option
Description
Virtualization
This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilities
provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
Fn Lock—enabled by default
Lock Mode Disable/Standard—enabled by default
Lock Mode Enable/Secondary
Minimal
Thorough—enabled by default
Auto
0 seconds—enabled by default.
5 seconds
10 seconds
Enable Full Screen Logo—not enabled
Prompt on warnings and errors—enabled by default
Continue on warnings
Continue on warnings and errors
Disabled
Enabled - by default
Restrict MEBx Access
Enable USB Provision - disabled by default
Enable MEBx hotkey—enabled by default
System setup
35