Dell Inspiron 1010 Посібник з експлуатації - Сторінка 36

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell Inspiron 1010. Dell Inspiron 1010 45 сторінок. Service manual
Також для Dell Inspiron 1010: Посібник із швидкого старту (26 сторінок)

Друкувати сторінку
Dell Inspiron 1010 Посібник з експлуатації
Back to Contents Page
  System Board
Dell™ Inspiron™ 1010 Service Manual 
  Removing the System Board
  Replacing the System Board
  Entering the Service Tag in the BIOS
  Setting the Keyboard Matrix
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the System Board
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the keyboard (see
 
4. Remove the palm rest (see
 
5. Remove the hard drive (see
 
6. Remove the palm rest bracket (see
 
7. Remove the coin-cell battery (see
 
8. Remove the 2-in-1 memory and processor board (see
 
9. Remove the Mini-Cards (see
 
10. Remove the TV tuner card (see
 
11. Remove the 3-in-1 Media Card Reader (see
 
12. Remove the two screws that secure the system board to the computer base.
1
screws (2)
 
13. Lift the system board out of the computer base.
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the Hard
Drive).
Removing the Palm Rest
Bracket).
Removing the Coin-Cell
Battery).
Removing the 2-in-1 Memory and Processor
Removing the
Mini-Card).
Removing the TV Tuner
Card).
Removing the Media Card
2
system board
Removing the
Board).
Reader).
Battery) before working inside the