Dell Inspiron 1010 Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell Inspiron 1010. Dell Inspiron 1010 45 сторінок. Service manual
Також для Dell Inspiron 1010: Посібник із швидкого старту (26 сторінок)
Друкувати сторінку
Back to Contents Page
Battery Status Light Board
Dell™ Inspiron™ 1010 Service Manual
Removing the Battery Status Light Board
Replacing the Battery Status Light Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Battery Status Light Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the hard drive (see
6. Remove the palm rest bracket (see
7. Disconnect the battery status light board cable from the system board connector.
8. Lift the battery status light board off the computer base.
1 battery status light board cable
connector
3 battery status light board
Replacing the Battery Status Light Board
1. Replace the battery status light board on the computer base.
2. Connect the battery status light board cable to the system board connector.
3. Replace the palm rest bracket (see
4. Replace the hard drive (see
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the Hard
Drive).
Removing the Palm Rest
Bracket).
2 battery status light board
cable
Replacing the Palm Rest
Bracket).
Replacing the Hard
Drive).
Removing the
Battery) before working inside the