Dell Inspiron 5160 Посібник з експлуатації - Сторінка 31
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell Inspiron 5160. Dell Inspiron 5160 43 сторінки. Dell inspiron 5160: quick start
Також для Dell Inspiron 5160: Посібник з налаштування (2 сторінок)
Друкувати сторінку
21. Lift the front of the system board out and away from the base plastics.
Installing the System Board
1. Insert the system board into the base plastics.
2. Insert the video connector on the replacement system board through the back of the base plastics.
3. Replace the two hex nuts that secure the video connector to the base plastics.
4. Replace the two M2.5 x 5-mm screws that secure the left antenna, which is located between the hard drive and optical drive cages, to the the hard
drive and optical drive cages.
5. Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.
6. Replace the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.
7. Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield to the system board.
8. Replace the speakers.
9. Replace the microprocessor.
NOTICE:
Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel.
Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.
10. Replace the
microprocessor thermal-cooling
11. Replace the
palm
rest.
12. Replace the
video
card, the
13. Replace the
display
assembly.
14. Replace the keyboard.
15. Replace the
hinge
cover.
16. Replace the
Mini PCI
card, modem, and
17. Replace the
optical
drive.
18. Replace the
hard
drive.
19. Insert the battery into the battery bay.
20. Connect the AC adapter to the computer and to an electrical outlet.
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
assembly.
button
board, and the
EMI shield
memory module(s)
that you removed from the old system board.
that you removed from the old system board.