Cra-Z-Art SoundMoovz BMZ001 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор серцевого ритму Cra-Z-Art SoundMoovz BMZ001. Cra-Z-Art SoundMoovz BMZ001 2 сторінки. Soundmoovz bmz001 series. wearable motion-activated musical bandz. age grade: 8 - adult

Друкувати сторінку

About Battery

• Only use "CR2032" coin type lithium batteries (primary batteries).

• Do not use rechargeable batteries.

• Non-rechargeable batteries must not be recharged.

• Different types of batteries, or new and used batteries must not be mixed.

• Only batteries of the same or equivalent type as recommended should be

used.

• Batteries should be replaced by an adult.

• Batteries must be inserted following the correct polarity.

• Exhausted batteries should be removed from the product.

• The supply terminals must not be short-circuited.

• Batteries should be removed from the product when not in use.

• Batteries supplied are for demonstration purposes only and may require

replacing within a short period of time.

Installation and replacing battery

1. Use a PH0 screwdriver.

2. Turn counter clockwise to open the battery lid cover.

Carefully remove the CR2032 battery.

3. Replace a new CR2032 battery.

4. Make sure that the positive(+) is facing in

the correct direction.

5. Turn clockwise to shut the battery lid cover.

Regulation Compliance Information

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC Caution:

user's authority to operate the equipment.

FCC Statement:

"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular in-

stallation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

—Consult the dealer or an experienced radio/TV technician for help."

Battery Recyling Information

Help the environment by disposing of batteries responsibly. The wheelie bin symbol

indicates that batteries must not be disposed of in domestic waste as they contain

substances which can be damaging to the environment and health. Please remove

exhausted batteries from the product and use designated collection points or

recycling facilities when disposing of batteries.

Dmet Products Corp. hereby declares that this radio equipment is manufactured in compliance with

the essential requirements and other relevant provisions of directive 2014/53/EC. A copy of Declara-

tion of Conformity can be obtained from Customer Service Department at LaRose Industries, LLC,

d/b/a Cra-Z-Art, Randolph, NJ 07869 USA.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by LaRose Industries, LLC, d/b/a Cra-Z-Art and Dmet Products Corp. is under license.

Other trademarks and trade names are those of their respective owners.

Google Play and the Google Play logo are trademarks of Google Inc.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

SoundMoovz™ logo are trademarks of Dmet Products Corp.

Fuji-soft Bld 12F, 3 Kanda-Neribeicho, Chiyoda-ku, Tokyo, 101-0022, Japan.

Designed in Japan. Made in China.

Pairing via Bluetooth

SoundMoovz™ is designed to be connected to a tablet and smartphone

with Bluetooth 4.2.

*Pairing steps may differ due to the update of the App in future

1. Turn on Bluetooth® from Settings in your smartphone or tablet.

2. Open SoundMoovz™ App.

3. Tap the icon "+" and search for pairing.

4. When SoundMoovz™ is ON, a device icon will be displayed on the

screen.

5. Tap the device icon for pairing.

6. When a check symbol is shown over the device icon; close the pop-up

display.

7. A balloon appears on the background, tap the balloon.

8. Pick a sound from the side bar menu.

9. Shake SoundMoovz™ device and the sound emits from the smartphone

or tablet. Check and adjust the volume of the smartphone or tablet. Make

sure silence mode is not on.

10. SoundMoovz™ is successfully paired via Bluetooth

11. Please repeat the steps if fails in pairing. Or, inquire via "Support" from

CR2032

the App.

Regulation Compliance Information

Radio and Television Interference

The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it

is not installed and used properly—that is, in strict accordance with Dmet Products' instructions—it may

cause interference with radio and television reception.

This equipment has been tested and found to comply with the limits for Class B digital device in accor-

sonable protection against such interference in a residential installation. However, there is no guarantee

that interference will not occur in a particular installation.

You can determine whatever your computer system is causing interference by turning it off. If the interfer-

ence stops, it was probably caused by the computer or one of the peripheral devices.

If your computer system does cause interference to radio or television reception, try to correct the inter-

ference by using one or more of the following measures:

• Turn the television or radio antenna until the interference stops.

• Move the computer to one side or the other of the television or radio.

• Move the computer farther away from the television or radio.

• Plug the computer into an outlet that in on a different circuit from the television or radio. (That is, make

certain the computer and the television or radio are on circuits controlled by different circuit breakers or

fuses.)

If necessary, consult an Dmet Products' Authorized Service Provider or Dmet Products. See the service

and support information that came with your Dmet Products' product. Or consult an experienced radio

and television technician for additional suggestions.

Important:

the FCC compliance and negate your authority to operate the product.

This product has demonstrated EMC compliance under conditions that included the use of compliant

peripheral devices and shielded cables (including Ethernet cables) between system components. It is

important that you use compliant peripheral devices and shielded cables between system components to

reduce the possibility of causing interference to radios, television sets and other electronic devices.

Responsible party (contact for FCC matters only):

Dmet Products Corp.

Fuji-soft Bld. 12F, 3 Kanda-Neribeicho, Chiyoda-ku, Tokyo, 101-0022, Japan

• Target Age: 8 years to adult

• Package dimensions[cm]: W: 11.4 / H: 18 / D: 7

• Weight[g]: 24

• Battery type: CR2032 lithium button cell battery (Primary cell)

• Battery nominal voltage: 3[V]

• Wireless standard: Bluetooth 4.2

• Bluetooth frequency range: 2.402[GHz]-2.48[GHz]

• Maximum RF output power of the product: 0.63mW

• Software version: DMT01 V0.2

• Firmware version: 0.0.1

• FCC ID: 2ALX7001

• IC: 22677-001

Cra-Z-Art, Randolph, NJ 07869 USA. Conforms to ASTM F963. Products

1-800-CRA-Z-ART or visit www.Cra-Z-Art.com.

MADE IN CHINA.