Allied Telesis AR400 Series Посібник зі швидкого встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Мережеве обладнання Allied Telesis AR400 Series. Allied Telesis AR400 Series 12 сторінок. How to set up pppoe between a linux client and access concentrator
Також для Allied Telesis AR400 Series: Як налаштувати (6 сторінок), Посібник з усунення несправностей (8 сторінок), Усунення несправностей (5 сторінок), Посібник зі швидкого встановлення (8 сторінок), Посібник з техніки безпеки (18 сторінок), Як це зробити (8 сторінок)

Друкувати сторінку
Allied Telesis AR400 Series Посібник зі швидкого встановлення
4

Selecting a Site

The router can be installed in a standard 19-inch rack, or on a level surface such
as a desktop or bench. When installing the router, choose a site that:
Allows adequate airflow around the router and its vents.
Is free of dust and moisture.
Will maintain an ambient temperature range of 0 to 40º C (32 to 104º F) and
a humidity range of 5 to 95% non-condensing.
Has a reliable and earthed (grounded) power supply circuit, preferably
dedicated and filtered.
Does not expose cabling to sources of electrical noise, such as radio
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
Allows easy access to the router's power and cable connections.

Installing the Router

This equipment must be earthed.
Follow these steps to install the router:
1.
Read the safety information.
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at
www.alliedtelesyn.co.nz/support/ar400/
2.
Gather additional items you will need.
To install the router in a rack you will need a Phillips #1 screwdriver. You
will also need screws and cage nuts to attach the brackets to your rack.
If also installing an optional Port Interface Card (PIC), you will need a PIC
Quick Install Guide (AR410 and AR410S routers only).
3.
Unpack the router.
Verify the package contents. If any items are damaged or missing, contact
your sales representative.
4.
Place the router in its operating location.
See the previous "Selecting a Site" section for guidelines on choosing a
suitable location. To install the router in a rack:
•
Ensure the rack has sufficient space for the router and its associated
cables. The router is 1U high
•
Unscrew the feet
AR400 Series Router
C613-04032-01 REV E