Avtech RMA-WTL1-SEN Вказівки щодо встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Вказівки щодо встановлення для Аксесуари Avtech RMA-WTL1-SEN. Avtech RMA-WTL1-SEN 5 сторінок. Tank level sensors
Друкувати сторінкуConfigure Your Switch Sensor
Configure Your Switch Sensor
Use Room Alert's Built-In Web Interface
Settings
Navigate to
below will vary depending on your Room Alert model.
1. Scroll down to Switch Sensor Settings.
2. Find the switch sensor label that matches the port you connected your switch sensor
to. For example, if you used the first switch sensor port on your Room Alert, look for
Sensor 1 Label; if you used the second, look for Sensor 2 Label, and so on.
3. In Sensor X Label, you may leave the default, "Switch Sen X," or enter something more
descriptive of up to 15 characters. You may use the following characters in sensor
labels: letters, numbers, spaces, hyphens (-), underscores (_) and periods (.).
4. In Alarm On, select the alarm state (
may find the alarm state of your switch sensor under the Features & Specifications
section of this Installation Note.
5. In Alarm Profile, which controls light towers and relays on your Room Alert, you may
leave the default,
Save Settings
6. Select
automatically reboot and commit your changes.
Sensors
in your Room Alert web interface. The options you see
Open
Profile 1
, or choose another profile from the drop-down menu.
at the top or bottom of the page. Your Room Alert will
Closed
or
) for your switch sensor. You
Page 5
AVT-171211-1.1.0
www.serverroomenvironments.co.uk