Dell PowerEdge 2850 Додатковий посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Додатковий посібник для Ноутбук Dell PowerEdge 2850. Dell PowerEdge 2850 20 сторінок. Dell server quick reference
Також для Dell PowerEdge 2850: Посібник з інсталяції (32 сторінок), Матриця підтримки (21 сторінок), Інформаційне оновлення (24 сторінок), Посібник (44 сторінок), Короткий довідник (2 сторінок), Посібник користувача (30 сторінок)
Друкувати сторінку
Installing the New System Board and Riser Board
1
Unpack the new system board.
2
Carefully lower the system board into the chassis until the tabs on the chassis fit through the
corresponding slots in the system board.
3
Slide the system board towards the back of the chassis until the retention pin engages.
4
Replace the front-fan tray:
Place the front-fan tray over the three securing posts.
a
Slide the front-fan tray to the left until it locks into position.
b
5
Replace the front fans.
6
Raise the drive-bay retraction bar and rotate it toward the back of the chassis until it is
completely flush with the top of the drive cage. See Figure 1-3.
7
Replace the memory modules.
8
Replace the memory module cover.
9
Replace the processor(s).
10
If applicable, replace the RAC card.
11
If applicable, replace the RAID key.
12
Replace the back-fan tray and the back fans.
13
Replace the power supply(s).
14
Replace the riser board in the expansion-card cage with the new riser board. See "Upgrading
the Dell PowerEdge 2850 Expansion-Card Riser Board."
15
Reinstall the expansion-card-cage. See "Replacing the Expansion-Card Cage" in "Installing
System Options" in your Installation and Troubleshooting Guide.
16
If applicable, reconnect the RAID battery cable to the riser board. See Figure 1-4.
17
Reinstall the cover.
18
If applicable, reattach the bezel.
Upgrading the Dell PowerEdge 2850 Expansion-Card Riser Board
1
If applicable, remove the RAID memory module from the expansion-card riser board.
2
Press both release tabs on the expansion-card guide and swing open the guide. See Figure 1-4.
Upgrading Your System Board and Riser Board
9