Craden DP8 Посібник зі служби підтримки - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник зі служби підтримки для Аксесуари для принтерів Craden DP8. Craden DP8 19 сторінок. Transaction printers
Також для Craden DP8: Технічний посібник (8 сторінок), Посібник з монтажу (2 сторінок), Додатковий посібник (18 сторінок)
Друкувати сторінку915 Function - Printwire Print Test
This test determines the condition of the printhead and associated cables and drive electronics.
Insert a 3 x 5" minimum single sheet of paper or multi-part form, press 9 1 5 FUNCT. The
document will feed and print four lines that look like the following:
This printout consists of numbers from 1 to 24 and a line above and below each number. The
lines above and below each number are printed by that corresponding pin. Any missing lines
indicate a missing/broken/bent/intermittent printwire. If all lines are present, the printhead,
associated mechanical devices and electrical circuits are functioning properly.
942 Function - Buffer Print (Dump)
This test is used by software and hardware engineers to determine exactly what commands were
sent to the printer by the host system. Immediately after a transaction, insert paper and press 942
FUNCT on the keypad. The buffer contents will print. Even small transactions can result in
multiple page printouts of printable data and control character information.
946 Function - Skew Calibration
This test calibrates the skew sensors. Press 9 4 6 FUNCT and insert known square paper. If the
paper inserts square to the edge guide and the rollers, press ENTER. If the paper inserts skewed,
press EJECT and reinsert.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2
PIN TEST
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(
see the video at
www.craden.com/skewsensor.wmv
17
)