ENSONIQ MR-76 Посібник для початківців - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для початківців для Синтезатор ENSONIQ MR-76. ENSONIQ MR-76 17 сторінок. Synthesizer ensoniq zr-76; mr-76

Друкувати сторінку

created a great sequences that you want to move into your external sequencer. You have

two options. One is to save the sequence as a standard MIDI file (see Disk Functions) or

you can play the MR/ZR sequence in real-time into the external sequencer.

External sequencer:

Set it up to follow external MIDI Clock

If it has the ability to record several tracks (and MIDI channels) at once, do that setup.

MR/ZR:

Press the System/MIDI button

Turn the Parameter knob to select Edit MIDI Settings

Press Enter

Turn the Parameter knob to select Xmit MIDI Clocks =

Select ON with the Value knob

*Press the Select Sound button

Turn the Parameter knob to select the MIDI Out instrument

Change the MIDI Channel to 1

Press the Send to Track button

Press Track 1

Press Enter

(Repeat the above steps* and assign the MIDI Out instrument to all other tracks

INCLUDING the Rhythm track. Be sure to adjust the MIDI channel to match the track you

are going to send the MIDI OUT instrument to, i.e. Channel 2-Track 2, Channel 3-Track3

etc.)

Go into Record mode on your external sequencer

Press Play on the MR/ZR

(You WILL NOT HEAR any sound as the transfer is happening. The MR/ZR does not

have the ability to have a dual MIDI status per track.)

When the song is completed, change the external sequencer's MIDI clock back to Internal

and in the external sequencer, assign the necessary bank and program changes to each

track to select the desired sounds.

MR/ZR control over a MIDI tone module or keyboard

MIDI connections with an external keyboard or tone module:

MIDI Out of the MR/ZR to MIDI In of the external module

Audio Out of the MR/ZR and the tone module to the Audio inputs of a mixer

Audio Out of the mixer to a pair of headphones or powered monitors

External keyboard or module:

Refer to that product's user manual to set it to Multimode

MR/ZR:

Press the Select Sound button

Turn the Parameter knob to select the MIDI Out instrument

Change the MIDI Channel to match the track you are sending it to

Press the Send to Track button

Press the desired Track button

Press Enter

Any track that has the MIDI Out instrument assigned to it will control any external MIDI

module or keyboard connected.

MR/ZR GETTING STARTED GUIDE