Dell Vostro 1450 Посібник з експлуатації - Сторінка 41
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell Vostro 1450. Dell Vostro 1450 48 сторінок. Document
Також для Dell Vostro 1450: Інформація про налаштування та функції (9 сторінок), Посібник з експлуатації (48 сторінок), Посібник із швидкого старту (2 сторінок)
Back to Contents Page
Speaker Module
Removing the Speaker Module
Replacing the Speaker Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Speaker Module
1. Follow the instructions in
2. Remove the battery (see
3. Remove the keyboard (see
4. Remove the two screws that secure the speaker module to the computer base.
5. Make note of the speaker module cable routing.
6. Disconnect the speaker module cable from the connector on the system board.
7. Lift the speaker module off the computer base.
1
screws (2)
3
speaker module cable connector
Replacing the Speaker Module
1. Follow the instructions in
2. Replace the speaker module on the computer base and route the speaker module cable along the routing guides.
3. Replace the two screws that secure the speaker module to the computer base.
4. Connect the speaker module cable to its connector on the system board.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the
Keyboard).
Before You
Begin.
UserManuals.info
Removing the
2
speaker module
Battery) before working inside the