Dell Vostro 5470 Посібник користувача - Сторінка 38
Переглянути онлайн або завантажити pdf Посібник користувача для Ноутбук Dell Vostro 5470. Dell Vostro 5470 45 сторінок. Notebook pc
Також для Dell Vostro 5470: Інформація про налаштування та функції (5 сторінок), Налаштування та технічні характеристики (29 сторінок), Технічний посібник (46 сторінок), Посібник з підключення (9 сторінок)
Друкувати сторінку
Battery Charge LED
Discharging when Battery
charge is <=10%
Device Status Lights
Turns on when you turn on the computer and blinks when the computer is in a power management mode.
Turns on when the computer reads or writes data.
Turns on steadily or blinks to indicate battery charge status.
Beep Codes
The computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of
beeps, called beep codes, identify various problems. The delay between each beep is 300 ms, the delay between each
set of beeps is 3 seconds, and the beep sound lasts 300 ms. After each beep and each set of beeps, the BIOS should
detect if the user presses the power button. If so, BIOS will jump out from looping and execute the normal shutdown
process and power system.
Code
Cause and Troubleshooting Steps
1
BIOS ROM checksum in progress or failure
System board failure, covers BIOS corruption or ROM error
2
No RAM detected
No memory detected
3
Chipset Error (North and South Bridge Chipset, DMA/IMR/ Timer Error) , Time-Of-Day Clock test
failure , Gate A20 failure , Super I/O chip failure , Keyboard controller test failure
System board failure
4
RAM Read/Write failure
Memory failure
5
Real-time clock power fail
CMOS battery failure
6
Video BIOS test failure
Video card failure
7
CPU - cache test failure
Processor failure
8
Display
Display failure
38
Off/Hibernate
Off
Standby
Blinking White