Dell XPS 13 7390 2-in-1 Посібник з експлуатації - Сторінка 28

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell XPS 13 7390 2-in-1. Dell XPS 13 7390 2-in-1 49 сторінок.
Також для Dell XPS 13 7390 2-in-1: Налаштування та технічні характеристики (22 сторінок), Посібник із швидкого старту (18 сторінок)

Steps

1. Peel the fingerprint reader cable from the keyboard.

2. Remove the speaker cable from the routing guides on the left keyboard bracket.

3. Loosen the captive screw that secures the left keyboard bracket to the palm-rest assembly.

4. Using a plastic scribe, pry the left keyboard bracket off the palm-rest assembly.

5. Loosen the captive screw that secures the right keyboard bracket to the palm-rest assembly.

6. Using a plastic scribe, pry the right keyboard bracket off the palm-rest assembly.

7. Disconnect the keyboard cable and keyboard backlight cable from the keyboard controller board.

8. Peel the keyboard controller board cable from the keyboard.

9. Remove the 38 screws (M1.2x1.4) and ten screws (M1.2x1.6) that secure the keyboard to the palm-rest assembly.

NOTE:

Peel off the three copper foil from the palm-rest assembly, and then peel off the two conductive tapes on the

keyboard assembly to separate the keyboard assembly and the palm-rest assembly.

10. Lift the keyboard off the palm-rest assembly.

Installing the Keyboard

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of keyboard assembly and provide a visual representation of the installation procedure.

Removing and installing components