Dell XPS 13 9315 2-in-1 Посібник з експлуатації - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Ноутбук Dell XPS 13 9315 2-in-1. Dell XPS 13 9315 2-in-1 37 сторінок.
Також для Dell XPS 13 9315 2-in-1: Налаштування та технічні характеристики (27 сторінок), Посібник з підключення зовнішнього дисплея (11 сторінок)
Table 16. System setup options—Performance menu
Performance
Multi-Core Support
Multiple Atom Cores
Intel® SpeedStep
Enable Intel® SpeedStep Technology
C-State Control
Enable C-State Control
Intel® Turbo Boost Technology
Enable Intel® Turbo Boost Technology
Intel® Hyper-Threading Technology
Enable Intel® Hyper-Threading Technology Enabled or disabled the Intel® Hyper-Threading mode of the processor. If
Dynamic Tuning:Machine Learning
Enable Dynamic Tuning:Machine Learning
Table 17. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear BIOS Event Log
Thermal Event Log
Clear Thermal Event Log
Power Event Log
Clear Power Event Log
Changes the number of Atom cores available to the operating system. The default
value is set to the maximum number of cores.
Default: All Cores
Enables or disables the Intel® SpeedStep Technology to dynamically adjust
processor voltage and core frequency, decreasing average power consumption
and heat production.
Default: ON
Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON
Enabled or disabled the Intel® TurboBoost mode of the processor. If enabled,
the Intel® TurboBoost driver increases the performance of the CPU or graphics
processor.
Default: ON
enabled, the Intel® Hyper-Threading increases the efficiency of the processor
resources when multiple threads run on each core.
Default: ON
Enabled or disabled OS capability to enhance power tuning capabilities based on
detected workloads. Note: This option is only for development only and will not be
customer visible.
Default: OFF
Select keep or clear BIOS events logs.
Default: Keep Log
Select keep or clear Thermal events logs.
Default: Keep Log
Select keep or clear Power events logs.
Default: Keep Log
System setup
27