Avtek TouchScreen 5 Connect+ Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Avtek TouchScreen 5 Connect+. Avtek TouchScreen 5 Connect+ 18 сторінок. Interactive intelligent panel
Друкувати сторінку
Simple Troubleshooting
Machine Fails to Work Normally
Remote control failure
Machine automatically
shut down
PC Mode
Signal out of range
Background has
vertical lines or streaks
Image lack of color,
color is incorrect
Display format that
is not supported
Touch Function
Touch function invalid
Touch positioning not correct
Video Function Can't Work Normally
No picture and no sound
With horizontal or vertical
stripes or image dithering
No color, color is weak,
or image is weak
Audio Function Can't Work Normally
With image but without sound
Only one speaker has sound
HDMI output without sound
Check whether there are other objects between remote control and equipment control
receiving window, thus leading to failure of remote control.
Check whether the battery electrode in the remote control is correct.
Check whether remote control needs to replace battery.
Whether set sleep or not.
Check whether there is sudden power outage.
The system will automatically shut down if the interactive intelligent Panel's external
channel loses signal for 5 minutes. Please check the input and connection of the signal.
Check whether display is set correctly.
Check whether resolution is the best resolution.
Adjust line and field synchronization in menu.
Select automatic correction in menu.
Adjust clock and phase position in menu.
Check whether VGA is not well connected or has quality problem.
Adjust chromatic and brightness or contrast in menu.
Select automatic correction in menu.
Adjust clock and phase position in menu.
Check whether the size of article touched is comparable with finger.
Check whether touch pen is facing the screen.
Check whether the machine is started state.
Check whether signal wire is well plugged, whether INPUT is corresponding to it.
If in internal computer mode, check whether internal computer is started.
Check whether signal wire is well connected.
Check whether other electronic equipment or power tools are placed around the machine.
Adjust chromatic and brightness or contrast in menu.
Check whether signal wire is well connected.
Check whether mute button is pressed for mute.
Press VOL + / - to adjust volume.
Check whether audio line is connected correctly.
Adjust sound balance in menu.
Check whether computer sound control panel only sets up one sound channel.
Check whether audio line is connected correctly.
Check whether connect external device.
14