Dell Alienware Aurora R9 Налаштування та технічні характеристики - Сторінка 10

Переглянути онлайн або завантажити pdf Налаштування та технічні характеристики для Робочий стіл Dell Alienware Aurora R9. Dell Alienware Aurora R9 17 сторінок.

3. USB 2.0 ports (5)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 480 Mbps.
4. DisplayPort
Connect an external display or a projector.
NOTE: The DisplayPort on the back panel of your computer is covered. Connect the display to the discrete graphics
card of your computer.
5. USB 3.1 Gen 2 Type-C port
Connect peripherals, such as external storage devices and printers. Provides data transfer speeds up to 10 Gbps.
NOTE: This port does not support video/audio streaming or power delivery.
6. USB 3.1 Gen 2 port
Connect peripherals, such as external storage devices and printers. Provides data transfer speeds up to 10 Gbps.
7. Side L/R surround port
Connect audio-output devices such as speakers and amplifiers. In a 7.1 speaker channel setup, connect the side-left and side-
right speakers.
8. Microphone port
Connect an external microphone to provide sound input.
9. Front L/R surround line-out port
Connect audio-output devices such as speakers and amplifiers. In a 2.1 speaker channel setup, connect the left and right
speakers. In a 5.1 or a 7.1 speaker channel setup, connect the front-left and front-right speakers.
10. Line-in port
Connect recording or playback devices such as a microphone or CD player.
11. Center/subwoofer LFE surround port
Connect the center speaker or the subwoofer.
NOTE: For more information about the speaker setup, refer the documentation that shipped with the speakers.
12. Rear L/R surround port
Connect audio-output devices such as speakers and amplifiers. In a 5.1 or a 7.1 speaker channel setup, connect the rear-left and
rear-right speakers.
13. USB 3.1 Gen 1 ports (3)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps.
14. Network port (with lights)
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.
The two lights next to the connector indicate the connectivity status and network activity.
10