Dell D18M Посібник користувача - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник користувача для Робочий стіл Dell D18M. Dell D18M 45 сторінок. Remote power switch
Також для Dell D18M: Налаштування та технічні характеристики (39 сторінок), Посібник з налаштування та технічних характеристик (39 сторінок), Посібник з монтажу (11 сторінок)
Друкувати сторінку
Installing the processor
1
Align the processor with the socket keys.
CAUTION:
Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into
the socket.
2
Align the pin-1 indicator of the processor with the triangle on the socket.
3
Place the processor on the socket such that the slots on the processor align with the socket keys.
4
Close the processor shield by sliding it under the retention screw.
5
Lower the socket lever and push it under the tab to lock it.
6
Install the
heat sink
assembly.
7
Close the front bezel door.
8
Install the:
a
bezel
b
cover
9
Follow the procedure in
Removing the system fan
1
Follow the procedure in
2
Remove the:
•
cover
•
bezel
3
Open the
front bezel
4
To remove the system fan:
a
Disconnect the system fan cable from the connector on the system board [1].
b Stretch the grommets securing the fan to the computer to ease the removal of the fan [2].
c Slide the system fan out of the computer [3].
Installing the system fan
1
Hold the system fan by the sides with the cable end facing the bottom of the computer.
2
Insert the grommets into the slots on the back of the computer.
3
Pass the grommets through the corresponding grooves on the system fan.
4
Stretch the grommets and slide the system fan toward the computer until it locks into place.
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
Removing and installing components
21