Dell Dimension 5100C Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Робочий стіл Dell Dimension 5100C. Dell Dimension 5100C 47 сторінок. Dell desktop computer quick reference guide
Також для Dell Dimension 5100C: Налаштування (2 сторінок)
Друкувати сторінку
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
9. Connect your computer and devices to electrical outlets, and turn them on.
10. Right-click the My Computer icon and click Properties.
11. Click the General tab.
12. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Removing Memory
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1. Follow the procedures in
"Before You
2. Remove the
computer
cover.
3. Press out the securing clip at each end of the memory module connector.
4. Grasp the module and pull up.
If the module is difficult to remove, ease the module back and forth to remove it from the connector.
Cards
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
Your Dell™ computer provides the following slots for PCI Express cards:
One PCI Express x16 card slot
l
One PCI Express x1 card slot
l
NOTE:
The slots for the PCI Express x16 and PCI Express x1 cards are half-height slots.
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see
PCI Express
Card."
If you are replacing a card, remove the current driver for the card from the operating system.
Installing a PCI Express Card
1. Follow the procedures in
"Before You
2. Remove the
computer
cover.
3. Pull up on the release tab on the card retention door from the inside to pivot the door open. Because the door is captive, it will remain in the open
Begin."
Begin."
"Removing a