Dell Dimension 5100C Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Робочий стіл Dell Dimension 5100C. Dell Dimension 5100C 47 сторінок. Dell desktop computer quick reference guide
Також для Dell Dimension 5100C: Налаштування (2 сторінок)
Друкувати сторінку
Configuration Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays
the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on
your computer or all devices attached to your computer.
Parameters
Allows you to customize the test by changing the test settings.
Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.
System Lights
Your power button light and hard-drive activity light may indicate a computer problem.
Power Light
Solid green
Blinking green
Blinks green several times and
then turns off
Solid amber
Blinking amber
Solid green and a beep code
during POST
Solid green power light and no
beep code and no video during
POST
Solid green power light and no
beep code but the computer
locks up during POST
Hard-Drive
Problem Description
Activity Light
Solid green
The hard-drive activity light is on when the computer reads data from or writes data to the hard drive. The light
might also be on when a device such as a CD player is operating.
Diagnostic Lights
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To help you troubleshoot a problem, your computer has four lights labeled "1," "2," "3," and "4" on the front panel. When the computer starts normally, the
lights flash. After the computer starts, all four lights display solid green. If the computer malfunctions, the color and sequence of the lights identify the problem.
Light Pattern
Problem Description
The computer is in a normal "off" condition,
has successfully booted to the operating
system, or a possible pre-BIOS failure has
occurred.
A possible processor failure has occurred.
Memory modules are detected, but a
memory failure has occurred.
Problem Description
Power is on, and the computer is operating
normally. On the desktop computer, a solid
green light indicates a network connection.
The computer is in the suspended state
(Microsoft® Windows® 2000 and Windows XP).
A configuration error exists.
The Dell Diagnostics is running a test, or a device
on the system board may be faulty or incorrectly
installed.
A power supply or system board failure has
occurred.
A problem was detected while the BIOS was
executing.
The monitor or the graphics card may be faulty or
incorrectly installed.
An integrated system board device may be
faulty.
Suggested Resolution
Plug the computer into a working electrical outlet and press the power button. Also see
"Power Problems" in your Owner's Manual.
Contact Dell. For information about contacting Dell, see your Owner's Manual.
Suggested Resolution
No corrective action is required.
Press the power button, move the mouse, or press a key on the
keyboard to wake the computer.
Check the diagnostic lights to see if the specific problem is identified.
If the Dell Diagnostics is running, allow the testing to complete.
Check the diagnostic lights to see if the specific problem is identified.
If the computer does not boot, contact Dell for technical assistance (see
your computer Owner's Manual for information about contacting Dell).
Check the diagnostic lights to see if the specific problem is identified.
Also, see "Power Problems" in your computer Owner's Manual.
See
"Beep
Codes" for instructions on diagnosing the beep code. Also,
check the diagnostic lights to see if the specific problem is identified.
Check the diagnostic lights to see if the specific problem is identified. See
"Video and Power Problems" in your computer Owner's Manual.
Check the diagnostic lights to see if the specific problem is identified. If
the problem is not identified, contact Dell for technical assistance. See
your computer Owner's Manual for information on how to contact Dell.
If you have two or more memory modules installed, remove the modules, reinstall
l
one module, and then restart the computer. If the computer starts normally, reinstall
an additional module. Continue until you have identified a faulty module or reinstalled
all modules without error.
If available, install properly working memory of the same type into your computer.
l
If the problem persists, contact Dell (see your computer Owner's Manual for
l
information about contacting Dell).
Suggested Resolution
No corrective action is
required.