Dell Dimension 5100C Посібник з експлуатації - Сторінка 36
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Робочий стіл Dell Dimension 5100C. Dell Dimension 5100C 47 сторінок. Dell desktop computer quick reference guide
Також для Dell Dimension 5100C: Налаштування (2 сторінок)
Друкувати сторінку
Displays the following information for the processor installed in the system: Processor Type, Processor Clock Speed, Processor Bus
Speed, Processor Cache Size, Processor ID number, whether the processor is Hyperthreading or Multiple Core Capable, and if the
Processor Info
processor has 64-bit Technology.
Displays the amount of Installed Memory, Memory Speed, Memory Channel Mode, and a description of the Memory Technology. This
option also displays a table that describes the memory size, whether the memory module is ECC capable, single or dual rank, type, and
Memory Info
organization.
Displays the contents of each PCI slot.
PCI Info
Controls the system's internal calendar and clock.
Date/Time
Determines the order in which the system searches for boot devices during system startup.
Boot Sequence
NOTE:
If you insert a boot device and restart the computer, this option appears in the system setup menu. To boot from a USB memory
device, select the USB device and move it so it becomes the first device in the list.
Drives
Identifies and defines the floppy drive attached to the FLOPPY connector on the system board as Off, USB, Internal, or Read Only.
Diskette Drive
Enables or disables a SATA device (such as a hard-drive). On (the default setting) enables the interface so that the device can be used.
SATA 0
Displays the Controller type (SATA), Port number the drive is using, Drive ID number, Capacity, Link Speed, and whether the drive is
controlled by the BIOS.
Enables or disables an ATA device (such as a CD or DVD drive). On (the default setting) enables the interface so that the device can be
used.
PATA 0
Displays the Controller type (ATA), Port number the drive is using, Drive ID number, Capacity, Link Speed, and whether the drive is
controlled by the BIOS.
Identifies and defines the SATA modes. You can set the SATA controller to Normal or Combo mode.
SATA Operation
Onboard Devices
You can set the NIC to On (default), Off, or On w/ PXE. When the On w/ PXE setting is active (available only for the future boot process),
the computer prompts the user to press <Ctrl><Alt><b>. Pressing this key combination causes a menu to display that allows you to select
Integrated NIC
a method for booting from a network server. If a boot routine is not available from the network server, the computer attempts to boot
from the next device in the boot sequence list.
Integrated
Enables or disables the onboard audio controller.
Audio
Front USB
Set to On (default) so that USB devices will be detected and supported in the operating system. The No Boot option enables a USB port,
but it does not recognize a USB storage device.
Ports
1394
Enables of disables the IEEE 1394 connections.
Controller
On enables internal USB for FlexBay.
USB for
FlexBay
NOTE:
This USB option appears only if a FlexBay device is installed.
Video
This setting specifies which video controller is primary when two video controllers are present on the computer.
Primary Video
Video Memory
Use this option to select 8 MB (default) or 1 MB of system memory for an integrated video controller.
Size
Performance
If your computer processor supports Hyper-Threading, this option appears in the Options List.
HyperThreading
This setting specifies whether more than one core is enabled. The performance of some applications may improve with an additional core
Multiple CPU
enabled. Defaults to On (second core enabled).
Core
This field specifies whether Enhanced Intel® SpeedStep® Technology will be enabled for all supported processor(s) in the computer.
SpeedStep
Bypass — Your computer does not test or change the current acoustics mode setting.
l
Quiet (default) — The hard drive operates at its most quiet setting.
l
Suggested — The hard drive operates at the level suggested by the drive manufacturer.
l
Performance — The hard drive operates at its maximum speed.
l
HDD Acoustic
Mode
NOTE:
Switching to performance mode may cause the drive to be noisier, but the drive performance is not affected.
NOTE:
Changing the acoustics setting does not alter your hard drive image.
This section displays available system security options.
Security
Displays the current status of the system setup password security feature and allows a new system setup password to be assigned and
Admin Password
verified.
System
Displays the current status of the system's password security feature and allows a new system password to be assigned and verified.
Password
This option locks the system password field with the setup password. When the field is locked, you can no longer disable password
Password
security by pressing <Ctrl><Enter> when the computer starts. Also, a valid Admin password is required to change the system password.
Changes
Defaults to Unlocked.
Execute
Enables or disables Execute Disable memory protection technology. On is the default setting.
Disable