AVteq NEAT-BRK Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Стелажі та підставки AVteq NEAT-BRK. AVteq NEAT-BRK 5 сторінок. Neat bar mount

STEP 1

Attach camera spine

•

Remove the screws of the locking tab on the camera spine (B) and center the camera spine

vertically on the Avteq display mount.

•

Fix position of camera spine using the top hooks on both sides. After positioning, screw in the

locking tab. It should be adjusted so that the bottom of the camera spine cannot separate from the

bottom of the display mount.

STEP 2

Install Neat Bar wall mount to bracket (NEAT-BRK)

•

Refer to Neat Bar Camera's user manual for instructions on how to assemble the wall mount

included with the Neat Bar camera.

•

To Position Camera Above Display:

Attach Neat provided wall mount to the

top front of Avteq's Neat Bar Bracket

(A). Slide Avteq's bracket mount so that

the top 4 thread holes line up with the

4 beveled holes in the Neat wall mount.

Use M4 screws (D) [x4] provided to secure

the Neat wall mount to the Neat Bar

Bracket.

(Locking Tab)

Above Display:

Neat Wall Mount included

with Neat Bar Camera

avteqinc.com | 3