Dell XC6320 Посібник з рішень для гіперконвергентних пристроїв веб-масштабу - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з рішень для гіперконвергентних пристроїв веб-масштабу для Робочий стіл Dell XC6320. Dell XC6320 23 сторінки. Web-scale hyperconverged appliance
Також для Dell XC6320: Початок роботи (50 сторінок)

Друкувати сторінку

Dell XC6320 Посібник з рішень для гіперконвергентних пристроїв веб-масштабу

1. Supported Hardware, Firmware, and Software

Updating firmware

Table 3. System component update guide

System components

Network Daughter Card

PSUs

NIC

BIOS

iDRAC

Dell PERC H730 Mini or HBA330 mini

Front HDDs

Front SSDs

SATADOM

To update the firmware of the discovered system components, use Dell OpenManage Essentials. For instructions about using Dell

OpenManage Essentials to monitor and update the discovered components of the Dell XC730-16G system, see Updating Server

BIOS, Firmware, Drivers, and Applications in the OpenManage Essentials User's Guide.

NOTE: Dell Nautilus may be used as an alternative to the Nutanix web console for updating firmware of the front HDDs

and SSDs.

Updating drive firmware with Dell Nautilus

To update disk firmware with Dell Nautilus:

Turn off Controller Virtual Machine (CVM).

For information about how to turn off a node, see the Nutanix Administration and Reference document.

Put hypervisor in Maintenance mode.

Access system GUI, and do one of the following:

•

Connect the physical keyboard or monitor or mouse to the ports on the Dell XC730-16G.

•

Connect to the iDRAC GUI.

NOTE: For information about configuring and accessing the iDRAC GUI, see the

Dell.com/support/home.

Mount the Dell Nautilus ISO or the USB key to the system using virtual media.

While restarting the server, press F11 to open BIOS boot manager.

From the list, select EFI Boot Manager.

From the EFI boot list, select Virtual CD or the USB drive.

Utility

Dell OpenManage Essentials

Nutanix web console

Contact Dell Support

iDRAC Quick Start Guide at